CT965 LANforge-ICE 1Gbps Portable WAN Emulator

The CT965 is an excellent choice for a portable network emulator destined for use in a rugged invironment. It supports speeds up to 980Mbps (bi-directional) or 1Gbps when traffic load is not maxed out in both directions. It supports standard VGA, Keyboard, and Mouse interfaces for easy console/desktop access to the system. The CT965 hardware can support up to 3 WAN emulations with aggregate bandwidth of about 4Gbps. Contact your sales representative if you prefer more than a single WAN emulation or LANforge-FIRE traffic generation feature sets. No additional hardware or software is required, but you may wish to manage the system using the LANforge-GUI on a separate machine.

Larger Images: front back

NOTE: This product may have a different hardware configuration than the system pictured above. Refer to your official quote for details.

NOTE: This product may have a different hardware configuration than the system pictured above. Refer to your official quote for details.

---

Candela Technologies Inc., 2417 Main Street, Suite 201, P.O. Box 3285, Ferndale, WA 98248, USA
www.candelatech.com | sales@candelatech.com | +1 360 380 1618

Example Network Diagram

Quick Start Guide

1. Connect Management ethernet port to Management network or management PC. If connecting directly to a PC, an ethernet cross-over cable should be used. Or, connect VGA, Keyboard, and Mouse to the chassis and manage it locally.
2. Connect Client to one WAN emulation port and Server to the other. The two interfaces will be bridged and this bridge will inject the network emulation.
3. Connect power plug to a standard US or European AC power source.
4. If managing remotely, install the LANforge-GUI on a separate management PC or Laptop. Windows and Linux GUIs are supported: Select the correct one from the CDROM or Candela Technologies Download page and install it.
5. The CT965 should now boot. If DHCP is enabled on the Management network, the CT965 will automatically acquire an IP address. If DHCP is not available, the IP address will be set to 192.168.1.101 by the LANforge scripts.
6. Start the LANforge-GUI on the management PC, or the CT965 server if managing locally, and click the 'Discover' button. It should find the CT965 appliance and add the IP address to the drop-down box in the Connect widget. Press 'Connect' and you will be connected to the CT965.
7. Select the WanLinks tab in the GUI. One of the pre-configured tests should already be running. You may double-click the row in the top section to modify the configuration. You can also view a real-time report of the test with the 'Display' button. Any modifications take place immediately after you click 'Submit'.

LANforge-ICE Related Screen Shots

Software Features

1. General purpose WAN and Network impairment emulator.
2. Able to simulate DS1, DS3, OC3, OC12, DSL, CableModem, Satellite links and other rate-limited networks, from 10bps up to 1Gbps (full duplex).
3. Can modify various network attributes including: network-speed, latency, jitter, packet-loss, packet-reordering, and packet-duplication.
4. Supports Packet corruptions, including bit-flips, bit-transposes and byte-overwrites.
5. Supports WanPath feature to allow configuration of specific behavior between different IP subnets, MAC addresses or other packet filters using a single pair of physical interfaces. WanPath support may require purchase of additional WanPath licenses, please ask your sales contact for more information.
6. Supports routed and bridged mode for more flexibility in how you configure your network and LANforge-ICE.
7. Supports WAN emulation across virtual 802.1Q VLAN interfaces more efficient use of limited physical network interfaces.
8. Supports 'WAN-Playback' allowing one to capture the characteristics of a live WAN and later have LANforge-ICE emulate those captured characteristics. The playback file is in XML format, and can be easily created by hand or with scripts. The free LANforge-ICEcap tool can be used to probe networks and automatically create the XML playback file.
9. Allows packet sniffing and network protocol decoding with the integrated Wireshark protocol sniffer.
10. Includes comprehensive management information detailing all aspects of the LANforge system including processor statistics, test cases, and Ethernet port statistics.
11. GUI runs as Java application on Linux, Solaris and Microsoft Operating Systems (among others).
12. GUI can run remotely, even over low-bandwidth links to accommodate the needs of the users.
13. Central management application can manage multiple units, tests, and testers simultaneously.
14. Includes easy built-in scripting to automatically iterate through bandwidth, latency and other settings. Advanced programatic scripting over a TCP socket also supported and example perl libraries and scripts are included.
15. Automatic discovery of LANforge resources simplifies maintenance and configuration of LANforge test equipment.

Hardware Specification

1. Rugged portable server-class system.
2. Operating System: Fedora Linux with customized Linux kernel.
3. 2 built-in wired Ethernet interfaces, two high-speed slots available for more NICs.
4. High-availability Ethernet hardware bypass option available.
5. Intel Core 2 processor or higher.
6. 1 GB RAM or more.
7. 40 GB or larger Hard Drive.
8. Solid State Drive option available.
9. Built-in VGA screen (keyboard & mouse are separate).
10. Additional specs: http://www.candelatech.com/lanforge_v3/nextdimension_prohd.pdf

List Price:
Fatal error: Uncaught Error: Call to undefined function printPrice() in /home/VHOSTS/candelatech.com/html/ct965_product.php:256 Stack trace: #0 {main} thrown in /home/VHOSTS/candelatech.com/html/ct965_product.php on line 256