CT964
LANforge-ICE 1Gbps WAN Emulator with 8GB RAM
The CT964 is an excellent choice for a 1U rackmount network emulator supporting speeds up to 990Mbps (bi-directional). The CT964 comes standard with 8GB RAM to support multiple seconds of latency.
The CT964 fits into a standard rack and is only 14 nches deep. It supports standard VGA, Keyboard, and Mouse interfaces for easy console/desktop access.
The CT964 is relatively noisy, so it is better suited for data center deployment than a desktop environment. The CT962 hardware can support up to 4 WAN emulations with each emulation running at near 1Gbps bi-directional.
Rack-Mount
Software Features
- General purpose WAN and Network impairment emulator.
- Able to simulate independent DSL, CableModern, Satellite links and other rate-limited networks, from 10bps up to 1Gbps (full duplex). Total aggregate throughput will not exceed 1Gbps
- Can modify various network attributes including: network speed, latency, jitter, packet-loss packet-reordering, and packet-duplication.
- Supports Packet corruptions, including bit-flips, bit-transposes, and byte-overwrites
- Supports WanPath features to allow configuration of specific behavior between different IP subnets, MAC addresses, or other packet filters using a single pair of physical interfaces.
- Supports routed and bridged mode for more flexibility in how you configure your network and LANforge-ICE.
- Supports WAN emulation across virtual 802.1Q VLAN interfaces.
- Supports WAN-Playback, allowing one to capture the characteristics of a live WAN and later have LANforge-ICE emulate those captured characteristics.
- Allows packet sniffing and network protocol decoding with the integrated Wireshark protocol sniffer.
- Includes comprehensive management information detailing all aspects of the LANforge system including processor statistics, test cases, and Ethernet port statistics.
- GUI runs as Java application on Linux, MAC, and Microsoft Operating Systems (among others).
- GUI can run remotely, even over low-bandwidth links to accomodate the needs of the users.
- CIncludes easy built-in scripting to automatically iterate through bandwidth, latency, and other settings.
Hardware Features
- High-End Intel Multi-Core 1U rackmount server.
- Operating System: 64-bit Fedora Linux with customized Linux kernel.
- 4 built-in 10/100/1000 Ethernet interfaces, one of which should be used for management.
- 1 IPMI port.
- High-availability Ethernet hardware bypass option available.
- One Quad-Core Intel E3 v2 processor, 3.6+GHz.
- One PCIe x16 slot (2-6 port 10/100/1000, 1-2 port 10G fibre, etc.).
- 8 GB or more RAM.
- 40 GB or larger Hard Drive. Solid State Drive option available.
- Weight: 18 lbs or 8.2 kg.
- Dimensions: 17 x 14 x 1.75 inches Metric: 432 x 356 x 45 mm.
- Power Supply: Fixed 350W AC.
- Estimated Power Usage: 1.4 Amps @ 120 VAC under load, 0.7 Amps idle.
- ROHS compliant.
List Price: $9,290 List Price with 1 Year support (17%): $10,869
Additional Features and Upgrades
Unless otherwise noted in the product description, these features usually cost extra:
