Ping Test

Purpose:

In this test scenario, the LANforge CT523c generates packets on the Ethernet port toward the wired side of the Access Point. The AP then transmits these frames to the real devices conected to the AP via Wi-Fi. LANforge will run a throughput test, cycle through the next set of stations, and continue this process until all tests are completed. Chambers and attenuators are not required for this test; however, running it inside isolation chambers typically provides more stable and reliable results. This feature is supported in LANforge version 5.4.9 and later.

Test Case:

Step 1:

Open Chrome and enter the LANforge Manager's IP address followed by port 5454 in the address bar. This will open the WebGUI Login Page as shown below:

Step 2:

Select Interop and enter login credentials to sign in:

• Username: test@lanforge.com
• Password: lanforge

Step 3:

After logging into the WebGUI, the user should enter the LANforge Manager's IP address and select Connect. The Device Manager page will then be displayed, showing all real devices connected to the Candela Box. This view includes devices across multiple operating systems, such as Android, iOS, Windows, Linux, and MacOS.

• NOTE: Real Devices must be clustered using Interop Cookbooks and have a unique hostname to appear in Device Manager.

Step 4:

After reviewing the connected devices, the user should navigate to the Testing page. In the Testing page, select the required devices from the Available Devices panel, choose Ping Test from the Tests panel, enter necessary test parameters, and then click Run Test to begin the Ping test.

Ping Test Parameters

1. Instance Name^* - Specifies the custom name for the test. The instance name must begin with an alphabetic character. Special characters and numbers cannot be used at the beginning of the instance name. Each test must have a unique instance name.
   • Example: Ping_Test1
2. Duration^* - Defines the total time for which the Ping test will run, in minutes.
   • Example: 5
3. Client Resource^# - Automatically populated with the Resource IDs of the selected devices.
   • Example: 101
4. Delay^* - Sets the frequency of pings.
   • Example: 5
5. Target Type^* - Type of target client should ping during test.
6. Target^* - The destination address (URL or IP) that the resources will attempt to ping.
   • Example: 192.168.1.101, www.google.com

^* - Mandatory
^# - Automatically filled

Step 5:

After clicking Run Test, an instance will be created using the specified test name. During the test execution, the user can monitor the real-time graph, review logs in the Log Viewer, and observe the configured test parameters. Once the test has completed, the user should generate the PDF report from the Testing page and save it to the desired directory.

Note: When the test is initiated, the cross connection is created in the Generic tab in LANforge Manager. After the Test completes, a detailed PDF report is saved in the webgui_reports folder located under the home/lanforge directory on the LANforge manager.