CT503-10G High-Speed LANforge-FIRE Traffic Generator
The CT503-10G is an excellent choice for testing
high-performance networks and network components. The CT503-10G consists of
a single 1U multicore-processor system with a dual 10 Gigabit Fiber NIC.
The system can generate and receive almost 10 Gbps to itself (about 40 Gbps total across the
backplane). 10 Gigabit CX4 Ethernet interfaces are available plus other quantities and types of
interfaces. Additional systems can be clustered for increased traffic generation capacity.
The CT503-10G 1U rackmount chassis fits into a standard rack and is about 14 inches deep. It supports standard
VGA, Keyboard, and Mouse interfaces for easy console/desktop access to the system.
The rackmount chassis is relatively noisy, so it is better for a data center deployment than
a desktop environment. Other form factors better suited for traveling or desktop use
are also available at similar prices and performance. This system includes the
10 Gigabit Armageddon feature.
VoIP and virtual interface support is priced separately.
Please communicate your preferences to your sales representative.
No additional hardware or software is required, but you may wish to
manage the system using the LANforge GUI on a separate
machine.
Larger Images: front
back
NOTE: This product may have a different hardware
configuration than the system pictured above. Refer to your official quote for details. |
NOTE: This product may have a different hardware
configuration than the system pictured above. Refer to your official quote for details. |
Candela Technologies Inc., 2417 Main Street, Suite 201, P.O. Box 3285,
Ferndale, WA 98248, USA
www.candelatech.com | sales@candelatech.com | +1 360 380 1618
Example Network Diagram
Candela Technologies Inc., 2417 Main Street, Suite 201, P.O. Box 3285,
Ferndale, WA 98248, USA
www.candelatech.com | sales@candelatech.com | +1 360 380 1618
Quick Start Guide
- Connect Management ethernet port to Management network or management PC. If
connecting directly to a PC, an ethernet cross-over cable should be used.
Or, connect VGA, Keyboard, and Mouse to the chassis and manage it locally.
- Connect one or more traffic generating ports to the downstream side of the device
under test. This usually is considered the 'client' side of the network.
- Connect one or more traffic generating ports to the upstream side of the device
under test.
- Connect power plug to a standard US or European AC power source.
- If managing remotely, install the LANforge GUI on a separate management PC or Laptop. Windows and
Linux GUIs are supported: Select the correct one from the CDROM or Candela
Technologies Download page and install it.
- The CT503-10G should now boot. If DHCP is enabled on the Management network,
the CT503-10G will automatically acquire an IP address. If DHCP is not available,
the IP address will be set to 192.168.1.101 by the LANforge scripts.
- Start the LANforge GUI on the management PC, or the CT503-10G server if managing
locally, and click the 'Discover' button.
It should find the CT503-10G appliance and add the IP address to the drop-down
box in the Connect widget. Press 'Connect' and you will be connected to
the CT503-10G.
- Select the Layer 3, Armageddon, Layer 4-7 and other LANforge FIRE related
tabs in the GUI to see existing traffic connections and to modify them
or add new ones. You can also view a real-time report of the test with the
'Display' button for some traffic types.
- LANforge can send Layer 3, Armageddon and most other traffic types between
any two physical ports, so one can send traffic between port eth0 and eth1,
eth0 and eth2, eth3 and eth4, etc. Use the Port Mgr tab in the GUI to configure
the IP addresses for the interfaces as appropriate for your network and cabling.
- Any modifications take place immediately after you click 'Submit'.
Candela Technologies Inc., 2417 Main Street, Suite 201, P.O. Box 3285,
Ferndale, WA 98248, USA
www.candelatech.com | sales@candelatech.com | +1 360 380 1618
LANforge-FIRE Related Screen Shots
Layer 3 (Ethernet, UDP, TCP) Connections
Layer 3 Create/Modify Screen
Candela Technologies Inc., 2417 Main Street, Suite 201, P.O. Box 3285,
Ferndale, WA 98248, USA
www.candelatech.com | sales@candelatech.com | +1 360 380 1618
Software Features
- Supports real-world protocols:
- Layer 2: Raw-Ethernet.
- 802.1Q VLANs.
- PPPoE: Integrated PPPoE support.
- Layer 3: IPv4, IPv6, UDP/IP, IGMP Multicast UDP, TCP/IP.
- Layer 4-7: FTP, HTTP, HTTPS, TFTP, SFTP, SCP
- Layer 3: Armageddon accellerated UDP/IP (line speed on appropriate hardware).
- Layer 4-7: TELNET, PING, DNS, SMTP, NMAP (via add-on script).
- File-IO: NFSv3, NFSv4, CIFS, iSCSI.
- Supports up to 1000 concurrent TCP connections with base license package.
- The CT503-10G is able to generate up to 10Gbps on each port, depending on protocols
mix and speed of the network under test. Supports at least 500 VoIP (SIP, RTP) calls if appropriate
licenses are purchased.
The portable chassis configurations may run
at different speeds than the 1U or 2U rackmount systems.
- Hardware supports over 30,000 TCP connections on a single machine, but base license
package includes licenses for 1000 connections. Contact sales for additional licenses.
- Supports real-world compliance with ARP protocol.
- Supports ToS (QoS) settings for TCP/IP and UDP/IP connections.
- Uses publicly available Linux and Windows network stacks for increased standards compliance.
- Utilizes libcurl
for FTP, HTTP and HTTPS (SSL), TFTP and SCP protocols.
- Supports file system test endpoints (NFS, CIFS, and iSCSI file systems, too!).
File system mounts can use the virtual interface feature for advanced testing
of file server applications.
- Supports custom command-line programs, such as telnet, SMTP, and ping.
- Comprehensive traffic reports include: Packet Transmit Rate, Packet Receive Rate,
Packet Drop %, Transmit Bytes, Receive Bytes, Latency, Jitter,
various Ethernet driver level counters, and much more.
- Supports generation of reports that are ready to be imported into your favorite
spread-sheet.
- Allows packet sniffing and network protocol decoding with the integrated
Wireshark protocol sniffer.
- GUI runs as Java application on Linux, MAC and Microsoft Operating
Systems (among others).
- GUI can run remotely, even over low-bandwidth links to accommodate the
needs of the users.
- Central management application can manage multiple units, tests, and
testers simultaneously.
- Includes easy built-in scripting for iterating through rates and packet
sizes, with automated reporting. Also supports scriptable command line interface (telnet)
which can be used to automate test
scenarios. Perl libraries and example scripts are provided!
- Automatic discovery of LANforge data generators simplifies configuration
of LANforge test equipment.
- LANforge traffic generation/management software is supported on
Linux and MS Windows.
Candela Technologies Inc., 2417 Main Street, Suite 201, P.O. Box 3285,
Ferndale, WA 98248, USA
www.candelatech.com | sales@candelatech.com | +1 360 380 1618
Hardware Specification
- High-End Intel Multi-Core 1U rackmount server.
- Operating System: Fedora 64-bit Linux with customized Linux kernel.
- 4 built-in 10/100/1000 Ethernet interfaces, one of which should be used for management.
- 1 IPMI port.
- High-availability Ethernet hardware bypass option available.
- One Quad-Core Intel E3 v2 processor, 3.6+Ghz
- 1 PCIe x16 slot (2-6 port 10/100/1000, 1-2 port 10G fibre, etc)
- 8 GB or more RAM.
- 40 GB or larger Hard Drive.
- Solid State Drive option available.
- Standard US or European power supply (automatically detects EU v/s US power).
- Weight: 18 lbs or 8.2 kg.
- Dimensions: 17 x 14 x 1.75 inches (14-inch deep 1U rackmount server) Metric:
432 x 356 x 44 mm.
- Power Supply: Fixed 350W AC
- Estimated Power Usage: 1.4 Amps @ 120 VAC under load, 0.7 Amps idle.
- ROHS compliant.
List Price: $15,155
List Price with 1 Year support (17%): $17,731
Additional Feature Upgrades
Unless otherwise noted in the product description, these features usually cost extra:
Candela Technologies Inc., 2417 Main Street, Suite 201, P.O. Box 3285,
Ferndale, WA 98248, USA
www.candelatech.com | sales@candelatech.com | +1 360 380 1618
Last modified: Fri Oct 11 06:23:53 PM PDT 2024